If you purchased a new watch, your SIM should already be inside the watch. You will not need to insert the SIM into your Adventurer.

Here's a quick video to show you how to insert your SIM.

On the Adventurer, the SIM tray is located on the back of the watch. Use a flat tool or a paperclip to press into the pinhole and release the SIM tray. Alternatively, you can use your fingernail to gently pry open the SIM tray from the bottom.

Take your SIM card and align it to match the cut corner in the SIM tray. Make sure the metal contacts on the SIM card are facing up. Carefully insert the SIM card into the tray.

To remove the SIM, simply pull the SIM out of the SIM tray.

Once your SIM card is inserted, snap the SIM tray back in place. Make sure the two triangles on the top left corner of the SIM tray align with the triangles on the watch. The SIM tray should be flush with the back of the watch.

Congratulations, you have successfully inserted a SIM card into your watch! Remember to always power off your watch before inserting or removing the SIM card to avoid any damage.

We hope this article has been helpful in guiding you through the process of inserting a SIM card into your smartwatch. Enjoy your new device and stay connected on-the-go!