To get the full benefits of the Spacetalk smartwatch features, you will need have an active physical SIM.
If you purchased a new watch, your SIM should already be inside the watch. You will not need to insert the SIM into your Loop.
How to Insert a SIM Card into Your Loop
Here's a quick video to show you how to insert your SIM.
Step 1: Open the SIM Tray
On the Loop, the SIM tray is located on the right side of the watch. It is a small, rectangular slot with a pinhole next to it. Using a small pin or paperclip, insert it into the pinhole next to the SIM tray. Gently lever the pin away from the SIM tray until the tray pops out.
Step 2: Insert (or Remove) Your SIM Card
Once the SIM tray is open, you can now insert your SIM card. Take your SIM card and align it with the cut corner in the SIM tray. This ensures that the SIM card is with the metal contacts facing up, carefully place the SIM card into the tray.
To remove the SIM, pull the SIM out of the tray.
Step 3: Place the SIM Tray Back
After inserting the SIM card, gently push the SIM tray back into place. Make sure it is flush with the side of the watch to ensure a secure fit. If the SIM tray does not go back in easily, double check that the SIM card is inserted correctly.
Congratulations, you have successfully inserted a SIM card into your watch! Remember to always power off your watch before inserting or removing the SIM card to avoid any damage.
We hope this article has been helpful in guiding you through the process of inserting a SIM card into your smartwatch. Enjoy your new device and stay connected on-the-go!